| Supports 1 Amp continuous current with 1.5 Amp stall. Low speed 'gear' for shunting operations. Size: 23mm x 16.5mm x 6.5mm (Approx).
Set amounts of 'water' and 'fuel' can be stored on the Sapphire providing real time fuel consumption. Burn rates can be selected. All CVs can be changed.
This decoder comes with a wiring harness and a 8 - 21 pin adaptor.
Main benefits include:
- Built to conform to all relevant NMRA Standards
- High frequency back-emf motor control - high frequency to reduce audible noise
- Supports RailCom®
- Asymmectrical DCC support
- Size: Length 23mm x Width 17mm x Height 5mm
- Low speed gear for shunting operations
- Optional operation on conventional DC layouts
- 14, 28 and 128 speed steps
- Provides 1A coninuous motor current, 1.5A stall
- Four function outputs rated at 233mA each. Total current sum of function outputs = 500mA
- Supports advanced consist control and extended addressing
- Support for programming on the mainline (operations mode programming)
- Support for all form of programming asx described in NMRA RP-9.2.3
write |
& Gaugemaster 
